Re: Make it unanimous


	/-/S'pht-Translator-Active/-/

Re: Make it unanimous

Posted By: Ernie Date: 5/7/04 5:30 p.m.
In Response To: Make it unanimous (Steve Levinson)

: I agree, version 2 is really, really cool. Perfect in fact. I can't imagine
: rounded edges being feasible. You might want to make it a bit thinner -
: 5mm is pretty thick and 1mm etching is actually pretty deep as theese
: things go. I suspect that 3mm thick with 0.5mm etching would be ideal.
After getting an info update from Mr. Swan, I have an questions that need to be answered by the community.
How much would someone really pay for an Clear/Frosted 2 cm x 2cm (3/4") Style 2, 3mm thick with 0.5mm etching keychain?
How about an silver-metalic one, of the same dimensions? Apparently the clear mixture is more expensive to produce than another type, but I'll hopfully get more specific pricing quotes from Mr. Swan come Monday.
Personal, I liked style 2 - but Style 1 is good too. I've alreddy created an Iron-on for myself after I made the Style 1. I Looooovvvve my customized T-shirts.
Regards,
-Blayne [ernie]

[ Post a Reply | Message Index | Read Prev Msg | Read Next Msg ]
Pre-2004 Posts

Replies:

[ Post a Reply | Message Index | Read Prev Msg | Read Next Msg ]
Pre-2004 Posts

Your Name:
Your E-Mail Address:
Subject:
Message:
: After getting an info update from Mr. Swan, I have an questions that need to : be answered by the community. : How much would someone really pay for an Clear/Frosted 2 cm x 2cm (3/4") : Style 2, 3mm thick with 0.5mm etching keychain? : How about an silver-metalic one, of the same dimensions? Apparently the clear : mixture is more expensive to produce than another type, but I'll hopfully : get more specific pricing quotes from Mr. Swan come Monday. : Personal, I liked style 2 - but Style 1 is good too. I've alreddy created an : Iron-on for myself after I made the Style 1. I Looooovvvve my customized : T-shirts. : Regards, : -Blayne [ernie]

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:
Optional Link URL:
Optional Link Title:

If necessary, enter your password below:
Password:

Problems? Suggestions? Comments? Email maintainer@bungie.org
Marathon's Story Forum is maintained with WebBBS 5.12.

	Re: Make it unanimous
	Posted By: Ernie	Date: 5/7/04 5:30 p.m.
	In Response To: Make it unanimous (Steve Levinson) : I agree, version 2 is really, really cool. Perfect in fact. I can't imagine : rounded edges being feasible. You might want to make it a bit thinner - : 5mm is pretty thick and 1mm etching is actually pretty deep as theese : things go. I suspect that 3mm thick with 0.5mm etching would be ideal. After getting an info update from Mr. Swan, I have an questions that need to be answered by the community. How much would someone really pay for an Clear/Frosted 2 cm x 2cm (3/4") Style 2, 3mm thick with 0.5mm etching keychain? How about an silver-metalic one, of the same dimensions? Apparently the clear mixture is more expensive to produce than another type, but I'll hopfully get more specific pricing quotes from Mr. Swan come Monday. Personal, I liked style 2 - but Style 1 is good too. I've alreddy created an Iron-on for myself after I made the Style 1. I Looooovvvve my customized T-shirts. Regards, -Blayne [ernie]

Marathon polyurethane keychains? Perhaps...	Ernie	5/4/04 3:04 p.m.
Re: Marathon polyurethane keychains? Perhaps...	Devin Sanera	5/4/04 3:19 p.m.
SHUTUP!! Just... SHUTUP!! Sorry, JK. Greetings! NM	the Battle Cat	5/5/04 5:08 a.m.
Can someone tell me what that was about? NM	Steve Levinson	5/5/04 5:11 a.m.
Senility. You may be next....lol NM	Yossarian	5/5/04 6:52 a.m.
Just funnin the new guy. JK=just kidding NM	the Battle Cat	5/6/04 5:32 a.m.
Rights from Bungie to sell Marathon stuff NM	Andrew Nagy	5/5/04 9:22 a.m.
OK, found the old post.	Andrew Nagy	5/6/04 9:02 a.m.
Re: Marathon polyurethane keychains? Perhaps...	HolyMcGibblets	5/4/04 6:21 p.m.
Re: Marathon polyurethane keychains? Perhaps...	Mista_B	5/4/04 8:55 p.m.
Re: Marathon polyurethane keychains? Perhaps...	the Battle Cat	5/5/04 5:06 a.m.
Re: Marathon polyurethane keychains? Perhaps...	Steve Levinson	5/5/04 5:25 a.m.
Re: Marathon polyurethane keychains? Perhaps...	Ernie	5/5/04 8:58 a.m.
Re: Marathon polyurethane keychains? Perhaps...	Steve Swan	5/5/04 11:51 a.m.
Re: Marathon polyurethane keychains? Perhaps...	Mista_B	5/5/04 12:47 p.m.
Wow - we're thinking on the same wavelength	Steve Levinson	5/5/04 12:52 p.m.
Re: Wow - we're thinking on the same wavelength	Steve Swan	5/5/04 2:06 p.m.
Re: Wow - we're thinking on the same wavelength	Yossarian	5/5/04 2:21 p.m.
Re: Marathon polyurethane keychains? Perhaps...	Johannes Gunnar	5/5/04 2:20 p.m.
Re: Marathon polyurethane keychains? Perhaps...	Steve Levinson	5/6/04 10:41 a.m.
Re: Marathon polyurethane keychains PICs	Ernie	5/6/04 1:35 p.m.
Re: Marathon polyurethane keychains PICs	Mista_B	5/6/04 2:37 p.m.
Re: Marathon polyurethane keychains PICs	Forrest of B.org	5/6/04 3:05 p.m.
Re: Marathon polyurethane keychains PICs	the Battle Cat	5/7/04 6:51 a.m.
Make it unanimous	Steve Levinson	5/7/04 7:54 a.m.
Re: Make it unanimous	Ernie	5/7/04 5:30 p.m.
$5-$7'ish NM	Mista_B	5/7/04 5:43 p.m.
Re: Make it unanimous	Steve Levinson	5/7/04 5:51 p.m.
Re: Make it unanimous	Ernie	5/9/04 5:04 p.m.
$15'ish is okay for me. NM	Mista_B	5/9/04 5:57 p.m.
Re: Make it unanimous	Steve Swan	5/10/04 6:05 a.m.



	Your Name:
	Your E-Mail Address:
	Subject:
	Message: : After getting an info update from Mr. Swan, I have an questions that need to : be answered by the community. : How much would someone really pay for an Clear/Frosted 2 cm x 2cm (3/4") : Style 2, 3mm thick with 0.5mm etching keychain? : How about an silver-metalic one, of the same dimensions? Apparently the clear : mixture is more expensive to produce than another type, but I'll hopfully : get more specific pricing quotes from Mr. Swan come Monday. : Personal, I liked style 2 - but Style 1 is good too. I've alreddy created an : Iron-on for myself after I made the Style 1. I Looooovvvve my customized : T-shirts. : Regards, : -Blayne [ernie]
	If you'd like to include a link to another page with your message, please provide both the URL address and the title of the page:
	Optional Link URL:
	Optional Link Title:
	If necessary, enter your password below:
	Password: