Re: sticky walls


	/-/S'pht-Translator-Active/-/

Re: sticky walls

Posted By: the Battle Cat Date: 2/3/04 6:48 a.m.
In Response To: Re: sticky walls (Elliott)

: walls, I meant walls.
Sticky walls are caused by too sharp of an angle on a floor poly that intersects with a wall poly. Change the angle of the poly so that it is not so sharp or if that is not possible, using split polys behind the wall will cure the problem. Check out the link below. This cures the walls that trap you like flypaper and the walls that shake the snot out of you when you rub by them.
Gary Simmons
the Battle Cat

Hastur's cure for sticky walls

[ Post a Reply | Message Index | Read Prev Msg | Read Next Msg ]
Pre-2004 Posts

Replies:

sticky polys Elliott 2/2/04 10:27 a.m.

Re: sticky polys Adam Ashwell 2/2/04 10:39 a.m.

Re: sticky walls Elliott 2/2/04 11:17 a.m.

Re: sticky walls Ernie 2/2/04 11:21 a.m.

Re: sticky walls thermoplyae 2/2/04 11:52 a.m.

DMA's solution to impassable polys D-M.A. 2/3/04 12:17 a.m.

NOOOOOO, it got screwed up when I posted it :(( *NM* D-M.A. 2/3/04 12:19 a.m.

Re: DMA's solution to impassable polys D-M.A. 2/3/04 12:35 a.m.

Why don't you just spray them with some WD40 :P *NM* Steve Levinson 2/2/04 2:36 p.m.

hehe *NM* Johannes Gunnar 2/2/04 10:46 p.m.

How OT of you steve! ::cracks whip:: *NM* Todd 2/2/04 11:29 p.m.

Re: sticky walls the Battle Cat 2/3/04 6:48 a.m.

[ Post a Reply | Message Index | Read Prev Msg | Read Next Msg ]
Pre-2004 Posts

Your Name:
Your E-Mail Address:
Subject:
Message:
: Sticky walls are caused by too sharp of an angle on a floor poly that : intersects with a wall poly. Change the angle of the poly so that it is : not so sharp or if that is not possible, using split polys behind the wall : will cure the problem. Check out the link below. This cures the walls that : trap you like flypaper and the walls that shake the snot out of you when : you rub by them. : Gary Simmons : the Battle Cat

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:
Optional Link URL:
Optional Link Title:

If necessary, enter your password below:
Password:

Problems? Suggestions? Comments? Email maintainer@bungie.org
Marathon's Story Forum is maintained with WebBBS 5.12.

sticky polys	Elliott	2/2/04 10:27 a.m.
Re: sticky polys	Adam Ashwell	2/2/04 10:39 a.m.
Re: sticky walls	Elliott	2/2/04 11:17 a.m.
Re: sticky walls	Ernie	2/2/04 11:21 a.m.
Re: sticky walls	thermoplyae	2/2/04 11:52 a.m.
DMA's solution to impassable polys	D-M.A.	2/3/04 12:17 a.m.
NOOOOOO, it got screwed up when I posted it :(( NM	D-M.A.	2/3/04 12:19 a.m.
Re: DMA's solution to impassable polys	D-M.A.	2/3/04 12:35 a.m.
Why don't you just spray them with some WD40 :P NM	Steve Levinson	2/2/04 2:36 p.m.
hehe NM	Johannes Gunnar	2/2/04 10:46 p.m.
How OT of you steve! ::cracks whip:: NM	Todd	2/2/04 11:29 p.m.
Re: sticky walls	the Battle Cat	2/3/04 6:48 a.m.



	Your Name:
	Your E-Mail Address:
	Subject:
	Message: : Sticky walls are caused by too sharp of an angle on a floor poly that : intersects with a wall poly. Change the angle of the poly so that it is : not so sharp or if that is not possible, using split polys behind the wall : will cure the problem. Check out the link below. This cures the walls that : trap you like flypaper and the walls that shake the snot out of you when : you rub by them. : Gary Simmons : the Battle Cat
	If you'd like to include a link to another page with your message, please provide both the URL address and the title of the page:
	Optional Link URL:
	Optional Link Title:
	If necessary, enter your password below:
	Password: