Frequently Asked Forum Questions | ||||
Search Older Posts on This Forum: Posts on Current Forum | Archived Posts | ||||
Halo CE Pistol 3D Project | |
Posted By: Naveeda <naveed@gmail.com> | Date: 11/3/09 2:35 p.m. |
Caeser over at 2old2play.com created a really awesome 3D model of Halo CE pistol with case and bullets. Here is his description of how this all came about. If you are not into 3D modeling stuff jump right below to the pics. About 3 weeks ago I started working on a futuristic bullet in CAD for the Halo 3 team im on called; Vulgarity from 2old2play.com. Ive been a Sr Designer for automotive & aerospace going on 10 years and Ive been into graphic design for about 8 yrs, so I felt this project would just be something simple and fun to mix and meld my skills from my real job to my, fun graphic design side. Once I started the bullet i figured i need a case to house the futuristic bullets in. it didnt take very long before I started to add more detail and more detail. After about a week i had completed the futuristic bullet and case concept, and i thought it came out great, but was still missing something. So I got the bright idea that i needed a gun to tie it all together. My first thought was a 357 COP Derringer, but while it looked cool, it wasnt futuristic enough.
I had to model the trigger, the rubber grip, the gun stock, the magazine, the screws, lights, laser site, the slide on top thats connected to the laser site, and the bullet ejection cover plate. It was a lot to do and put detail into every little piece. My final task this week was finishing up the gun stock, the main part of the gun. In my early renders my edges were very hard and Mrs Doublefire suggested i put a break edge to smooth it out (basically radii or fillet's). This actually worked to my benefit as i wanted to blend the front handle of the gun into the nose anyway, but would need it to be blended. The blending task took about 2 days, just a very time consuming task trying to get them to look right at the intersection. So 3 weeks later I have finally finished my little project, what started out a simple futuristic bullet project turned into the massive renders you see below. The 3D CAD software I used to create my models is: Pro-E Wildfire 3
Un-rendered cad screen shots
|
|
Replies: |
Halo CE Pistol 3D Project | Naveeda | 11/3/09 2:35 p.m. |
Re: Halo CE Pistol 3D Project | Naveeda | 11/3/09 2:38 p.m. |
Re: Halo CE Pistol 3D Project | Louis Wu | 11/3/09 3:00 p.m. |
Re: Halo CE Pistol 3D Project | Naveeda | 11/3/09 3:16 p.m. |
Re: Halo CE Pistol 3D Project | Naveeda | 11/3/09 3:47 p.m. |
Re: Halo CE Pistol 3D Project | }SoC{BrownSound | 11/3/09 5:29 p.m. |
The HBO Forum Archive is maintained with WebBBS 4.33. |